Match Existing Roof Truss


Wood Roof Truss SPAN =__________ HEEL HEIGHT =___________

RIDGE LOACTION =__________ RIDGE HEIGHT =___________

To ensure a good match all dimensions should be measured to the nearest 1/16 of an inch.

SPAN: Distance from the outside of wall to outside of wall.

HEEL HEIGHT: Vertical dimension from top of wall to underside of wood roof truss sheathing at the outside face of stud.

RIDGE HEIGHT: Height from top of wall to top of peak of wood roof truss.

RIDGE LOCATION: Distance from outside of wall to peak of wood roof truss.

*NOTE* Dimensions should not include wall or roof sheathing.

Please Contact us with any additional questions:

Truss Component Services, Inc.

Voice 479-754-9909

Fax 501-325-1460

Suppliers of ALPINE Certified Truss Connector Plates, Engineering software, – Plan Take-Off /  Layout Services—Truss Plant Layout


©1980-2017 Truss Component Services, INC.
Supplier of Wave Truss Plates, Pallet Plates, Wood Truss, Wave Roof truss plates
Roof Modeling Software – TrusPlus/Alpine Engineering Software
Truswal Component Designer Alpine ITWBCG